|
|
 |
 公司新聞 ->止回閥標準匯總-三精閥門提供 |
| 止回閥標準匯總-三精閥門提供 |
| 點擊次數：3741 更新時間：2009-01-16 |
| |
- 止回閥標準匯總-三精閥門提供
標準編號 標準中文名稱 標準英文名稱
sy/t5215-87 鉆具止回閥
gb/t12235-1989 通用閥門法蘭連接鋼制截止閥和升降式止回閥 general purpose industrial valves—flanged steel globe valves and lift check valves
gb/t1241-1983 船用外螺紋鍛鋼截止止回閥 marine forged steel male thread stop and check valves
gb/t12233-1989 通用閥門鐵制截止閥與升降式止回閥 general purpose industrial valves—casting iron globe valves and lift check valves
gb/t12236-1989 通用閥門鋼制旋啟式止回閥 general purpose industrial valves—steel swing check valves
gb/t13932-1992 通用閥門鐵制旋啟式止回閥 general purpose industrial valves--cast iron swing check valves
gb/t18691-2002 農業灌溉設備止回閥 agricultural irrigation equipment--check valves
gb/t1952-1980 船用低壓外螺紋青銅止回閥 low bressure bronze male screw-thread check valve for marine use
gb/t597-1983 船用外螺紋青銅止回閥 marine bronze male thread lift check valves
gb/t592-1993 船用法蘭鑄鐵止回閥 marine cast iron flanged lift check valves
gb/t591-1993 船用法蘭鑄鐵截止止回閥 marine cast iron flanged stop check valves
gb/t586-1999 船用法蘭鑄鋼止回閥 marine cast steel flanged check valves
gb/t588-1993 船用法蘭青銅截止止回閥 marine bronze flanged stop check valves
gb/t589-1993 船用法蘭青銅止回閥 marine bronze flanged check valves
gb/t596-1983 船用外螺紋青銅截止止回閥 marine bronze male thread stop and check valves
gb/t585-1999 船用法蘭鑄鋼截止止回閥 marine cast steel flanged stop check valves
gb/t1953-1984 船用低壓外螺紋青銅截止止回閥 marine low pressure bronze male threaded stop check valves
jb/t8937-1999 對夾式止回閥
jb/t1736-1991(2005復審) 旋啟式止回閥閥瓣密封圈
jb/t1737-1991(2005復審) 旋啟式止回閥閥瓣密封圈壓板
jb/t53036-1999 止回閥 產品質量分等
nf e29-350-2003 工業用閥.鋼制球閥、球狀截止閥和止回閥 (industrial valves - steel globe and globe stop and check valves.)
nf e29-316-3-2000 供水用閥門.適用性要求和檢查試驗.第3部分:止回閥 (valves for water supply - fitness for purpose requirements and appropriate verification tests - part 3 : check valves.)
nf p43-017-1989 建筑物水管閥門.帶法蘭可調ea止回閥.一般技術規范 (valves and taps for water supply in buldings. controllable check valves ea,with flanges. general technical specifications.)
nf e29-373-1984 工業閥門.止回閥.鋼制，單搖板式，帶法蘭盤,iso標準壓力16，20，25，40，50，100 (industrial valves. flanged steel swing check valves. iso pn a6, iso pn 20, iso pn 25, iso pn 40, iso pn 50, iso pn 100.)
nf p43-007-1985 建筑物水管閥門.*控制非止回閥.一般技術規范 (valves and taps for water supply in buildings. controllable check valves class a. general technical specifications.)
nf s62-143-2001 固定的消防系統.氣體滅火系統用元件.第13部分:止回閥的要求和試驗方法 (fixed firefighting systems - components for gas extinguishing systems - part 13 : requirements and test methods for check valves and non-return valves.)
nf e29-335-2003 石油和天然氣工業用尺寸為dn 100及更小的鋼閘閥、球閥和止回閥 (steel gate, globe and check valves for sizes dn 100 and smaller, for the petroleum and natural gas industries.)
nf e29-372-2001 工業閥門.鑄鐵止回閥 (industrial valves - cast iron check valves.)
nf e48-423-2001 液壓傳動.減壓閥、順序閥、卸載閥、節流閥和止回閥.裝配面 (hydraulic fluid power - pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - mounting surfaces.)
ansi/asse 1024-1998 雙重止回閥型防回流裝置 (dual check valve type backflow preventers)
ansi/fci 74-1-1990 彈簧加載升降隔膜止回閥 (valves, spring loaded lift disc check)
ansi/awwa c 508-2001 2in(50mm)-24in(600mm)nps水廠設備用擺動止回閥 (swing-check valves for waterworks service, 2 in (50 mm) through 24 in (600 mm) nps)
ansi/ul 312-1996 消防裝置的止回閥 (check valves for fire-protection service)
bs en 13709-2003 工業用閥.鋼制球閥、球狀截止閥和止回閥 (industrial valves - steel globe and globe stop and check valves)
bs en iso 15761-2003 石油和天然氣工業用尺寸為dn 100及更小的鋼閘閥、球閥和止回閥 (steel gate, globe and check valves for sizes dn 100 and smaller, for the petroleum and natural gas industries)
bs en 12050-4-2001 建筑物和工地用廢水提升設備.制造和試驗原理.不含糞便和含有糞便的廢水用止回閥 (wastewater lifting plants for buildings and sites - principles of construction and testing - non-return valves for faecal-free wastewater and wastewater containing faecal matter)
bs iso 5781-2000 液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.安裝面 (hydraulic fluid power - pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - mounting surfaces)
bs en 1074-3-2000 供水用閥門.目的要求和適當驗收試驗的合理性.止回閥 (valves for water supply - fitness for purpose requirements and appropriate verification tests - check valves)
en 12334-2001 工業閥門 鑄鐵止回閥 industrial valves - cast iron check valves
pren 13327-1998 工業閥門 熱塑性材料止回閥 industrial valves - check valves of thermoplastics materials
en 13709-2002 工業閥門 鋼球和球止回閥 industrial valves - steel globe and globe stop and check valves
en 12094-13-2001+ac-2002 固定式消防系統 氣體滅火系統的部件 第13部分：對止回閥和非回流閥的要求及試驗方法 fixed firefighting systems - components for gas extinguishing systems - part 13: requirements and test methods for check valves and non-return valves
bs 7438-1991 彈簧加載型鋼和銅合金單盤壓片止回閥規范 (specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type)
din 5594-1994 有軌車輛用壓縮空氣裝置.雙止回閥.安裝和連接尺寸 (compressed air equipment for rail vehicles - double check valves - installation and companion dimensions)
din 86261-1998 造船用炮銅制可閉鎖帶法蘭dn15至500的止回閥 (non return valves for shipboard use, cutt off type, of gun metall, with flanges, dn 15 to 500)
din 86252-1998 造船用鑄鐵制可閉鎖帶法蘭dn15至500的止回閥 (non return valves for shipboard use, cutt off type, of cast iron, with flanges, dn 15 to 500)
din 85003-5-1997 造船用管件的交貨技術條件.第5部分:截止止回閥 (technical specifications for valves for shipboard use - part 5: cutt off type non return valves)
din 5593-1994 有軌車輛用壓縮空氣裝置.止回閥.安裝和連接尺寸 (compressed air equipment for rail vehicles - check valves - installation and companion dimensions)
din 3269-2-1988 地段和建筑物內飲水裝置用管件.止回閥pn10.檢驗 (valves for domestic drinking water installations; check valves pn 10; tests)
din 3269-1-1988 地段和建筑物內飲水裝置用管件.止回閥pn10.要求 (valves for domestic drinking water installations; check valves pn 10; requirements)
din 87101-1975 垂直型.公稱寬度50-150.公稱壓力1.自閉式止回閥.符合公稱壓力的法蘭連接 (non-return flaps (storm valves), self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10)
din 3441-5-1984 非增塑聚氯乙烯管件.壓緊止回閥pn6和pn10.尺寸 (unplasticized polyvinyl chloride (pvc-u) valves; pn 6 and pn 10 wafer type butterfly valves; dimensions)
din 87104-1975 din87101止回閥用閥插入件 (flap in-serts for non-return flaps in accordance with din 87101)
din 3247-1985 無止回閥.帶法蘭的吸濾器 (flanged suction strainers without non-return valve)
din 87106-1975 din87101止回閥用定位裝置 (locking devices for non-return flaps in accordance with din 87101)
din 3259-1985 帶止回閥的法蘭吸濾器(腳閥) (flanged suction strainers with non-return valve)
din 477-4-1982 氣瓶閥.輕便儲氣瓶頸的止回閥 (compressed gas cylinder valves; swing check valves for camping-cylinders)
din 3538-1986 煤氣裝置管件.止回閥.內螺紋接頭 (valves for gas installations; butterfly valves; female threaded ends)
din 3248-1985 無止回閥.帶內螺紋連接的吸濾器 (threaded suction strainers without non-return valve)
din 3249-1985 帶止回閥.內螺紋連接的吸濾器(腳閥) (threaded suction strainers with non-return valve)
din en 1074-3-2000 供水用閥門.適用性要求和檢查試驗.第3部分:止回閥 (valves for water supply - fitness for purpose requirements and appropriate verification tests - part 3: check valves; german version en 1074-3:2000)
din 74280-1998 空氣制動系統.止回閥 (air braking systems - check valve)
din en 13709-2003 工業用閥.鋼制球閥、球狀截止閥和止回閥 (industrial valves - steel globe and globe stop and check valves; german version en 13709:2002)
din 3845-1981 暖氣管件.帶套管接頭的銅合金制pn16止回閥.尺寸.材料 (valves for heating installations - copper alloy check valves pn 16 with screwed sockets - dimensions, materials)
din en 12094-13-2001 固定式消防系統.氣體滅火系統用元件.第13部分:止回閥和非止回閥的要求和試驗方法 (fixed firefighting systems - components for gas extinguishing systems - part 13: requirements and test methods for check valves and non-return valves; german version en 12094-13:2001)
din 86066-2002 止回閥用鑄鋼焊入式彎頭.dn50至150,pn10的法蘭接合 (cast steel welding elbows for storm valves - dn 50 to 150, connecting dimensions according to pn 10)
din 58362-7-2002 輸液.輸液器和附件.第7部分:止回閥 (infusion - infusion equipment and accessories - part 7: check valves)
din en iso 15761-2003 石油和天然氣工業用規格為dn100及更小的鋼閘閥、球閥和止回閥 (steel gate, glob and check valves for sizes dn 100 and smaller, for the petroleum and natural gas industries (iso 15761:2002); german version en iso 15761:2002 (german and english text))
din 87107-1975 din87101止回閥用扁墊圈 (gaskets for non-return flaps in accordance with din 87101)
din 87103-1975 din87101止回閥的罩蓋 (covers for non-return flaps in accordance with din 87101)
din 87102-1975 din87101止回閥的外殼 (casings for non-return flaps in accordance with din 87101)
din 87105-1975 din87101止回閥用帶凸肩的閉鎖螺釘 (screw plugs with cylindrical extension for non-return flaps in accordance with din 87101)
dl/t923-2005 火力發電用止回閥技術條件
gb/t1855-1993 船用法蘭鑄鐵單排吸入截止止回閥箱 marine flanged cast iron single arrangement suctio stop check box valve
gb/t1853-1994 船用法蘭鑄鋼舷側截止止回閥 marine flanged cast steel over board stop check valve
ul 1469-1995 回流止回閥的閥身強度和液壓損失率檢驗 (strength of body and hydraulic pressure loss testing of backflow special check valves )
jis f7372-1996 造船.鑄鐵5k回轉式止回閥 (shipbuilding -- cast iron 5k swing check valves)
jis f3058-1996 鑄鋼立式波浪止回閥 (cast steel vertical storm valves)
jis f7356-1996 造船.青銅5k升降止回閥 (shipbuilding -- bronze 5k lift check valves)
jis f7373-1996 造船.鑄鐵10k回轉式止回閥 (shipbuilding -- cast iron 10k swing check valves)
jis f7371-1996 造船.青銅5k回轉止回閥 (shipbuilding -- bronze 5k swing check valves)
jis f7495-2000 造船.球墨鑄鐵10k旋壓止回閥 (shipbuilding -- spheroidal graphite iron (ductile iron) 10k screw-down check globe valves)
jis f3060-1996 鑄鋼旋壓立式波浪止回閥 (cast steel screwdown vertical storm valves)
jis b8664-2001 液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面 (hydraulic fluid power -- pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- mounting surfaces)
iso 9952-1993 農業灌溉設備.止回閥 (agricultural irrigation equipment; check valves)
iso 15761-2002 石油和天然氣工業用尺寸為dn 100及更小的鋼閘閥、球閥和止回閥 (steel gate, globe and check valves for sizes dn 100 and smaller, for the petroleum and natural gas industries)
iso 15500-3-2001 道路車輛.壓縮天然氣(cng)燃料系統元部件.第3部分:止回閥 (road vehicles - compressed natural gas (cng) fuel system components - part 3: check valve)
iso 5781-2000 液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.裝配面 (hydraulic fluid power - pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - mounting surfaces)
sy/t5215-2005 鉆具止回閥
| | |
|
| |
|
| |
| |
|
| |
|
|
|
|
| |
 |
|
 |
| |
|
